Dayton Audio - ME650C

Below are all the different types of Dayton Audio. Select the device of your choice, to download the manual

Contents

One speaker is playing while the other is not Check the balance control on the receiver Make sure it is centered Loose connection at either the receiver or the speaker Double check connections Bad speaker cable Replace suspect speaker cable Receiver cuts on and off This could be caused by a short circuit between the positive and negative leads Check the connections at the back of the receiver and then at the speaker make sure that no strands of wire from one connector are touching the other connector 10 Caring For Your Ceiling Speakers The two most common ways that ceiling speakers are permanently damaged 1 Not enough power at higher volumes 2 Too much power at higher volumes Contrary to conventional wisdom far more speakers are ...